Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such.
If you’re still in two minds about garmin gps replacement screen and are thinking about choosing a similar product, AliExpress is a great place to compare prices and sellers. We’ll help you to work out whether it’s worth paying extra for a high-end version or whether you’re getting just as good a deal by getting the cheaper item.
Appendix
GPSMAP 1042xsv/1242xsv and 1022/1222 keyed chartplotters For those who prefer a keypad interface, the all-in-one solutions offered by the new 10-inch GPSMAP 1042xsv and the 12-inch GPSMAP 1242xsv can’t be beat. With an all-new industrial design, these combos feature a large, sunlight-readable screen coupled with a keypad interface and new multifunction rotary control. NOTE: The 10.6” and 7” G3X Touch and original 7” G3X™ displays are not mix-and-match interchangeable. To add G3X Touch displays to your panel, you’ll need to replace existing G3X units with the G3X Touch format. The integration and versatility provided by Garmin avionics make it easy to customize the ideal panel layout for your aircraft.
Appendix
Specifications
Physical Specifications
Specification Measurement Size
W × H × D: 8
29
/
32
Ч 5
19
/
32
Ч 3
1
/
8
in. (226 Ч 142 Ч 80 mm)
Weight
2.48 lb. (1.125 kg)
Display
W × H: 6 × 3
19
/
32
in. (152 × 91 mm)
Case
Fully gasketed, high-impact plastic and aluminum alloy, waterproof to IEC 60529 IPX-7
Approximately 1 sec. (The device is at or near the last location at which you
recently acquired satellites.)
Cold
Approximately 38 sec. (The device has moved more than about 500 mi.
[800 km] since it was turned off.)
Reacquisition < 1 sec.
Update Rate
1/sec., continuous
Accuracy
GPS
<33 ft. (10 m) 95% typical
DGPS
It provides 24 remote mic/line inputs, 12 XLR line outputs, an Expander port and a Monitor port for connecting to the Allen & Heath ME personal mixing or Aviom®A-Net16 system.Note that a GLD system can have a maximum of oneAR2412 AudioRack connected.GLD-AR84The expander AudioRack- Provides 8 remote mic/line inputs and 4 XLR line outputs. Allen and heath ar2412 user manual.
10-16 ft. (3-5 m) 95% typical (WAAS/EGNOS accuracy)
Velocity
0.05 m/sec. steady state
Power
Specification
Measurement
Source
10–32 Vdc
Usage
8.56 W max. at 13.8 Vdc
Fuse
3 A
NMEA 2000 Load Equivalency Number (LEN) 2 NMEA 2000 Draw
100 mA maximum
Calibrating the Touchscreen
The GPSMAP 700 series chartplotter touchscreen does not normally require calibration. However, if the
buttons do not seem to be responding properly, use the following process to calibrate the screen. 1. While the chartplotter is turned off, press .
The Warning screen appears.
2. Touch anywhere on the black portion of the screen for approximately 15 seconds until the calibration
screen appears.
3. Follow the instructions on the screen until “Calibration is complete” appears. 4. Touch oK.
Product Support by phone at 913/397.8200 or 800/800.1020. Go to
. In Europe, contact Garmin
(Europe) Ltd. at 44/0870.8501241. Before installing your GPSMAP 3000 series chartplotter, confirm that the package contains the items listed on the box. If any parts are missing,
contact your Garmin dealer immediately.
WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important
information.
To install the GPSMAP 3000 series chartplotter:
1. Mount the GPSMAP 3000 series chartplotter (
).
2. Mount the GPS antenna (
).
3. Connect the GPSMAP 3000 series device to power and to the GPS antenna (
).
4. Ensure the chartplotter software is up-to-date (
).
Although they are not necessary to use the GPSMAP 3000 chartplotter, you can also use this manual to:
Connect the chartplotter to NMEA 0183-compatible devices such as a VHF radio with DSC (
Connect the chartplotter to an external alarm (
).
Connect the chartplotter to a video input source (
Connect the chartplotter to an external video monitor (
).
Connect the chartplotter to other Garmin Marine Network compatible devices, such as a sounder or a radar (
).
Mounting the GPSMAP 3000 Series Chartplotter
You can use the included bracket to bail mount the chartplotter, or you can use the included template and hardware to flush mount the
chartplotter.
Bail Mounting the GPSMAP 3000 Series Chartplotter
Use the included bracket to bail mount the GPSMAP 3000 series chartplotter.
Tools required (not included):
• Drill and drill bit • Screwdriver • Pencil • Mounting hardware (screws or nuts, washers, and bolts)